CSS filtr Vlastnost
Příklad
Změnit všechny obrázky na černobílé (100% šedé):
img {
filter: grayscale(100%);
}
Tip: Další příklady „Vyzkoušejte si to sami“ níže.
Definice a použití
Vlastnost filter
definuje vizuální efekty (jako rozostření a sytost) prvku (často <img>).
Výchozí hodnota: | žádný |
---|---|
Zděděno: | Ne |
Animovatelné: | Ano. Přečtěte si o tématu Animable |
Verze: | CSS3 |
Syntaxe JavaScriptu: | objekt .style.filter="stupně šedi(100%)" |
Podpora prohlížeče
Čísla v tabulce určují první verzi prohlížeče, která plně podporuje vlastnost.
Čísla následovaná -webkit- určují první verzi, která pracovala s předponou.
Property | |||||
---|---|---|---|---|---|
filter | 53.0 18.0 -webkit- |
13.0 | 35.0 | 9.1 6.0 -webkit- |
40.0 15.0 -webkit- |
Syntaxe CSS
filter: none | blur() | brightness() | contrast() | drop-shadow() | grayscale() | hue-rotate() | invert() | opacity() | saturate() | sepia() | url();
Tip: Chcete-li použít více filtrů, oddělte každý filtr mezerou (viz „Další příklady“ níže).
Funkce filtru
Poznámka: Filtry, které používají procentuální hodnoty (tj. 75 %), přijímají hodnotu také jako desítkovou (tj. 0,75).
Filter | Description | Play it |
---|---|---|
none | Default value. Specifies no effects | |
blur(px) | Applies a blur effect to the image. A larger value will create more blur. If no value is specified, 0 is used. |
|
brightness(%) | Adjusts the brightness of the image. 0% will make the image completely black. 100% (1) is default and represents the original image. Values over 100% will provide brighter results. |
|
contrast(%) | Adjusts the contrast of the image. 0% will make the image completely black. 100% (1) is default, and represents the original image. Values over 100% will provide results with more contrast. |
|
drop-shadow(h-shadow v-shadow blur spread color) | Applies a drop shadow effect to the image. Possible values: h-shadow - Required. Specifies a pixel value for the horizontal shadow. Negative values place the shadow to the left of the image. v-shadow - Required. Specifies a pixel value for the vertical shadow. Negative values place the shadow above the image. blur - Optional. This is the third value, and must be in pixels. Adds a blur effect to the shadow. A larger value will create more blur (the shadow becomes bigger and lighter). Negative values are not allowed. If no value is specified, 0 is used (the shadow's edge is sharp). spread - Optional. This is the fourth value, and must be in pixels. Positive values will cause the shadow to expand and grow bigger, and negative values will cause the shadow to shrink. If not specified, it will be 0 (the shadow will be the same size as the element). Note: Chrome, Safari and Opera, and maybe other browsers, do not support this 4th length; it will not render if added. color - Optional. Adds a color to the shadow. If not specified, the color depends on the browser (often black). An example of creating a red shadow, which is 8px big both horizontally and vertically, with a blur effect of 10px: filter: drop-shadow(8px 8px 10px red); Tip: This filter is similar to the box-shadow property. |
|
grayscale(%) | Converts the image to grayscale. 0% (0) is default and represents the original image. 100% will make the image completely gray (used for black and white images). Note: Negative values are not allowed. |
|
hue-rotate(deg) | Applies a hue rotation on the image. The value defines the number of degrees around the color circle the image samples will be adjusted. 0deg is default, and represents the original image. Note: Maximum value is 360deg. |
|
invert(%) | Inverts the samples in the image. 0% (0) is default and represents the original image. 100% will make the image completely inverted. Note: Negative values are not allowed. |
|
opacity(%) | Sets the opacity level for the image. The opacity-level describes the transparency-level, where: 0% is completely transparent. 100% (1) is default and represents the original image (no transparency). Note: Negative values are not allowed. Tip: This filter is similar to the opacity property. |
|
saturate(%) | Saturates the image. 0% (0) will make the image completely un-saturated. 100% is default and represents the original image. Values over 100% provides super-saturated results. Note: Negative values are not allowed. |
|
sepia(%) | Converts the image to sepia. 0% (0) is default and represents the original image. 100% will make the image completely sepia. Note: Negative values are not allowed. |
|
url() | The url() function takes the location of an XML file that specifies an SVG filter, and may include an anchor to a specific filter element. Example: filter: url(svg-url#element-id) |
|
initial | Sets this property to its default value. Read about initial | |
inherit | Inherits this property from its parent element. Read about inherit |
Další příklady
Příklad rozostření
Použijte na obrázek efekt rozostření:
img {
filter: blur(5px);
}
Příklad rozmazání 2
Použijte rozmazaný obrázek na pozadí:
img.background {
filter: blur(35px);
}
Příklad jasu
Upravte jas obrazu:
img {
filter: brightness(200%);
}
Příklad kontrastu
Upravte kontrast obrázku:
img {
filter: contrast(200%);
}
Příklad vrženého stínu
Použijte na obrázek efekt vrženého stínu:
img {
filter: drop-shadow(8px 8px 10px
gray);
}
Příklad ve stupních šedi
Převeďte obrázek do stupňů šedi:
img {
filter: grayscale(50%);
}
Příklad rotace odstínu
Použijte otočení odstínu na obrázek:
img {
filter: hue-rotate(90deg);
}
Invertovat příklad
Invertujte vzorky na obrázku:
img {
filter: invert(100%);
}
Příklad neprůhlednosti
Nastavte úroveň krytí obrázku:
img {
filter: opacity(30%);
}
Příklad nasycení
Nasytit obrázek:
img {
filter: saturate(800%);
}
Příklad sépie
Převést obrázek na sépiový:
img {
filter: sepia(100%);
}
Použití více filtrů
Chcete-li použít více filtrů, oddělte každý filtr mezerou. Všimněte si, že pořadí je důležité (tj. použití grayscale() po sépia() bude mít za následek zcela šedý obrázek:
img {
filter: contrast(200%) brightness(150%);
}
Všechny filtry
Ukázka všech funkcí filtru:
.blur {
filter: blur(4px);
}
.brightness {
filter: brightness(0.30);
}
.contrast {
filter: contrast(180%);
}
.grayscale {
filter: grayscale(100%);
}
.huerotate {
filter: hue-rotate(180deg);
}
.invert {
filter: invert(100%);
}
.opacity {
filter: opacity(50%);
}
.saturate {
filter: saturate(7);
}
.sepia {
filter: sepia(100%);
}
.shadow {
filter: drop-shadow(8px 8px 10px green);
}
Související stránky
CSS výukový program: CSS obrázky
HTML DOM reference: vlastnost filtru